Masonry prices without materials: what is missing
The rate without materials is the most searched figure in this trade and at the same time the least informative. It describes one item among many, and it is the others that decide what you end up paying.
What a rate without materials actually is
It is the price for the work done, without what gets consumed on site. It excludes plaster mix, mortar, boards, profiles, adhesives and primers. There is logic to that: you can buy the material yourself and material prices move independently of labour. The trouble starts when the rate is taken for the price of the job, because between those two figures sits a whole range of items the price list says nothing about.
What a price list usually leaves out
- Transport and moving material on site. Bags and boards have to get upstairs. An upper floor without a lift is a different job from a ground floor with parking outside.
- Covering and protection. Sheeting, board, sealing doors, a site vacuum. In an occupied flat there is far more of it than in an empty one.
- Scaffolding and work at height. A stairwell or a tall ceiling means a platform or scaffolding, and that is erected and taken away.
- Removing and disposing of debris. A separate item, and with demolition often the biggest one after the labour itself.
- Making good after other trades. If it is not explicitly in the brief, nobody has allowed for it.
- Small consumables. Tapes, mesh, corner beads, primers. Individually nothing, together an item.
- Value added tax, where the quote is stated without it.
Why two quotes cannot be compared by the bottom figure
One quote may include debris removal, protection and making good after the electrician; the other may not. The bottom line then looks better while describing less work. The difference shows up during the job, usually at the worst moment, when backing out is no longer possible and negotiating happens under pressure.
The only way to compare is item by item. Ask for an itemised quote, and where something is missing, ask who will provide it. In this trade the question "what is not included" is more useful than "how much is it".
Where the spread comes from
Masonry work has a high share of preparation. Material cannot be mixed in arbitrarily small quantities, the floor is covered the same for one crack or ten, and the journey to site is the same for a small job as for a large one. That is why a small job works out dearer per square metre and why it pays to bundle small items into one visit, as described under small masonry jobs.
The second source of spread is the state of the substrate. Until old plaster is hacked off, nobody knows for certain what is behind it. A sound quote therefore also contains a sentence about what happens if the substrate turns out worse than expected.
What to do instead
Rather than hunting for a price list, send a brief: what needs doing, what condition it is in, roughly how much of it there is, what the access is like and when it should happen. Add photos. You will get an answer that applies to your case rather than an average of other people's jobs. What affects the price is summed up on What drives the price, and how to write the brief is covered in the guide to enquiries.
More articles
Describe the job
No drawings or exact square metres needed. Write what should be done, what condition it is in now and when you would like it finished. We will ask about the rest.
- We pass the enquiry to a firm that does masonry work in your area.
- If we have no partner in your area, we say so straight away instead of leaving you waiting.
- Photos of the current state help the most. You can send them to info@najdi-zednika.cz.